- UTP copper to multi-mode fiber converter
- Multi-mode fiber transmission, up to 2 km
- High-quality SC connector port
- Auto Negotiation
- Half/Full Duplex mode
- TX port supports auto MDI/MDI-X Crossover
- Built-in Smart Link Error Detection Technology
- Can be used as a Standalone converter or slotted into a Converter Chassis
- Hot-swappable
LevelOne provides a complete series of media conversion solutions for flexible network extensions.
The FVT-4001 media converter is able to convert network signals between UTP and fiber optic cable based networks. This allows extension of networks over a longer distance in multi-mode via fiber-optic cabling, able to transmit signals up to 2km.
Provides a 10/100BaseT/TX (SC) auto-negotiating RJ-45 connector port that supports full duplex and half duplex switch connectivity and MDI/MDI-X Auto Crossover. The Smart Link Fault Pass-through technology enables the switch to shut down data transmission when the link connection has failed.
The converters are IEEE802.3 10Base and 802.3u 100BaseTX and 100BaseFX compliant.
- Multi-mode fiber transmission, up to 2 km
- High-quality SC connector port
- Auto Negotiation
- Half/Full Duplex mode
- TX port supports auto MDI/MDI-X Crossover
- Built-in Smart Link Error Detection Technology
- Can be used as a Standalone converter or slotted into a Converter Chassis
- Hot-swappable
LevelOne provides a complete series of media conversion solutions for flexible network extensions.
The FVT-4001 media converter is able to convert network signals between UTP and fiber optic cable based networks. This allows extension of networks over a longer distance in multi-mode via fiber-optic cabling, able to transmit signals up to 2km.
Provides a 10/100BaseT/TX (SC) auto-negotiating RJ-45 connector port that supports full duplex and half duplex switch connectivity and MDI/MDI-X Auto Crossover. The Smart Link Fault Pass-through technology enables the switch to shut down data transmission when the link connection has failed.
The converters are IEEE802.3 10Base and 802.3u 100BaseTX and 100BaseFX compliant.
- Full duplex:
- Y
- Fiber type:
- MM
- Maximum transfer distance:
- 2000 m
- Wavelength:
- 1310 nm
- Dimensions (WxDxH):
- 85 x 119 x 26 mm
- Cable type:
- CAT-3/5
- Cabling technology:
- 10BASE-T, 100BASE-TX/100BASE-FX
- Operating relative humidity range:
- 10 - 90 %
- Compliance industry standards:
- IEEE802.3, IEEE802.3u, IEEE802.3x
- Power requirements:
- DC9V, 0.7A
- Connectivity technology:
- Wired
- Storage temperature range (T-T):
- -10 - 70 °C
- Source data-sheet:
- Icecat.biz
- Operating temperature range (T-T):
- 0 - 45 °C
- Hot-swap:
- Y
- Duplex port:
- Y
- Data transfer rate (max):
- 100 Mbit/s
- Safety:
- UL, cUL
- Connector(s):
- RJ-45, SC/ST
- Certification:
- FCC Class A, CE