- Supports a VDSL connection up to 2km over single pair copper wire
- Provides100Mbps downstream and 60Mbps upstream over 400m
- Features selectable Fast and Interleaved modes
- Selectable fixed data rate and fixed SNR margin
- Features 4 Dip Switches for Configuration Settings
- Low-Latency for Video/Voice/Data applications
Why convert Ethernet to VDSL?
The LevelOne VDS-0202 converts your data from Ethernet to VDSL, making it easy to send highbandwidth data over long distances. This new technology uses traditional coaxial cable instead of expensive Cat.5 cables.
New technology = cost-effective deployment
When using VDSL2 (Very High Speed Digital Subscriber Line) technology, users can transmit data up to 400 meters without having to add expensive Ethernet switches or cables to extend the network reach. And with 100Mbps downstream and 60Mbps upstream, VDSL2 technology provides ample space for all high bandwidth usage.
Fast transfer speeds? Yes.
Easy Installation? Yes.
VDS-0202 works especially well in applications where traditional coaxial cables are already installed: apartments, condominiums, hotels, university campus, etc. There is no need to run expensive Ethernet cables and installers can easily integrate VDSL technology into the existing network. The VDS-0202 is plug and play ready and requires minimum installation time.
Customized settings
Each VDS-0202 also allows for customized settings for advanced use. Using a built-in DIP switch, users can customize the behavior of the device to match the desired network configuration.
BNC connector
For networks that utilize coaxial cables for the Digital Subscriber line.
- Provides100Mbps downstream and 60Mbps upstream over 400m
- Features selectable Fast and Interleaved modes
- Selectable fixed data rate and fixed SNR margin
- Features 4 Dip Switches for Configuration Settings
- Low-Latency for Video/Voice/Data applications
Why convert Ethernet to VDSL?
The LevelOne VDS-0202 converts your data from Ethernet to VDSL, making it easy to send highbandwidth data over long distances. This new technology uses traditional coaxial cable instead of expensive Cat.5 cables.
New technology = cost-effective deployment
When using VDSL2 (Very High Speed Digital Subscriber Line) technology, users can transmit data up to 400 meters without having to add expensive Ethernet switches or cables to extend the network reach. And with 100Mbps downstream and 60Mbps upstream, VDSL2 technology provides ample space for all high bandwidth usage.
Fast transfer speeds? Yes.
Easy Installation? Yes.
VDS-0202 works especially well in applications where traditional coaxial cables are already installed: apartments, condominiums, hotels, university campus, etc. There is no need to run expensive Ethernet cables and installers can easily integrate VDSL technology into the existing network. The VDS-0202 is plug and play ready and requires minimum installation time.
Customized settings
Each VDS-0202 also allows for customized settings for advanced use. Using a built-in DIP switch, users can customize the behavior of the device to match the desired network configuration.
BNC connector
For networks that utilize coaxial cables for the Digital Subscriber line.
- Full duplex:
- Y
- Maximum transfer distance:
- 2000 m
- Data link protocol:
- ITU-T G.993.1/2, SG15Q4 DMT
- Dimensions (WxDxH):
- 90 x 120 x 28 mm
- Cable type:
- CAT.5
- I/O ports:
- 2 x RJ-45
1 x BNC - Cabling technology:
- 10/100Base-T
- Operating relative humidity range:
- 5 - 95 %
- Compliance industry standards:
- IEEE802.3, IEEE802.3u
- Power requirements:
- DC 5V, 1A/2A
- Connectivity technology:
- Wired
- Source data-sheet:
- Icecat.biz
- Operating temperature range (T-T):
- 0 - 50 °C
- Data transfer rate (max):
- 100 Mbit/s
- LED indicators:
- PWR, LAN1, LAN2 , BNC, M/S
- Certification:
- CE, FCC Class B